Gold Member Since 2011
Audited Supplier
Shanghai Special Metal Co., Ltd.

Wire Rope Pulley, Wire Rope Sheave, Rope Sheave manufacturer / supplier in China, offering Resin Sand Casting Rope Sheave, OEM Cast High Hardness Sprocket Gear, Integration Ingot Mold and so on.

(/ )

Supplier Homepage Product Cement & Mining Parts Resin Sand Casting Rope Sheave

Resin Sand Casting Rope Sheave

FOB Price: US $2,100-2,500 / Ton
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $2,100-2,500/ Ton
Get Latest Price
Production Capacity: 100, 000 Tons Per Year
Transport Package: Frame or as Your Require
Payment Terms: L/C, T/T, D/P

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: Rope Sheave
  • Type: Electric Hoist
  • Chain Falls: 1
  • Condition: New
  • Delivery Condition: Hardening and Tempering
  • Inspection: Ut, Mt
  • Trademark: CSM
  • Origin: Shanghai, China
  • Application: Double Beam Crane, Gantry Crane, Lifting Platform
  • Sling Type: Wire Rope
  • Certification: ISO9001:2000, SGS
  • Color: Painted as Require
  • Certificate: En 1024 3.1
  • Service: OEM, ODM
  • Specification: DIN, ASTM Standards, etc
  • HS Code: 8425311000
Product Description
Product Introduction
The product covered here is a dragging device which is installed in the derrick, and support the mine hoist, hoist support drag between the rolls to enhance the container, and guide the use of wire rope steering. Rope groove is with plastic lining or plastic block, which will increase the service life of wire rope.

This material is the casting steel G42CrMo4 ISO14737:2003(E), which is a fully killed steel, vacuum-degassed and processed to a fine grain size structure with improved properties both in toughness and in elongation.

Chemical composition: (%)

Mechanical properties
Checked at room temperature in the delivery condition i.e. after completion of the quality heat treatment from cylindrical cast-on test blocks (? 60 mm x 250 mm) available on every Sheaves: both the sample preparation and the testing comply with ASTM A 370-96.
PropertiesYield strengthTensile strengthElongationImpact Value
Delivery condition: Hardening and tempering.
All operations are carried-out at the in-house foundry plant.

The castings are manufactured in a workman-like manner as required in the German standard DIN EN
1599-1: August 1997, ruling the delivery conditions of castings. The molding is individually carried out within a modular flask by using a sand preparation based on resin bonding.

The melting is carried out in the oxygen steel plant ( 2 off 180 t BOF converters ); the ladle capacity allows a continuous bottom pouring process the speed of which is permanently controlled. The metal analysis is checked by using a computer linked spectrograph.

Heat treatment
Every sheave undergoes a combined quality heat treatment (Hardening and tempering) aiming both to grain refining and to stress relieving.

Rough machining
In order to meet the inside quality free of defect, we rough machine each sheave foe inner NDT control.

NDT testing
   UT: ASTM A609 Level II for the groove and boss center.
   MT: 100% ASTM A125 level I

Fine machining
Fine machine every sheave totally according to drawings.

Fettling and dressing
The castings are coated by antirust oil FPC-600 for transportation.
Every sheave is packed well and ready for delivery.

Quality assurance
The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000.
The standard documentation ensures the full traceability of every process step:
1. Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;
2. Dimensional check supported with a "as-built" sketch;
3. Record of the quality heat treatment
Send your message to this supplier
Ms. Helen Liu
To: Ms. Helen Liu

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now